SACMI produces single and double-channel thermal machines for ceramic product firing. Sacmi kilns can be equipped with devices designed to ensure heat recovery, energy saving and cost cutting.
In the FMA kiln combustion is ensured by an air/gas modulated system with ratio correction. This guarantees maximum flexibility and output and optimised consumption. Read more
In FMS combustion is ensured by a fixed air system. The temperature is controlled by modulating the gas, while the amount of air to the burners remains constant.
In FCC, losses are minimised and consumption is optimised. A modern pressure control system prevents overpressure and ensures consistent quality.
In the FBN dual-channel kiln, adjustments, cycles and temperatures can be set independently. This makes the machine flexible ensuring low energy consumption.
Standard roller, to be used for general purposes. Its mechanical properties are enhanced in hot working conditions for temperatures below 1200 °C. Recommended for preheating and cooling.
Semi-technical roller, with good mechanical properties which, combined with a low vitreous percentage, make it suitable for use in all areas of the kiln.
Technical roller, featuring excellent resistance to chemical stress. Its physical characteristics make it suitable for use even in the firing area, with medium/high loads.
Highly technical roller, characterised by a high elastic modulus and low porosity. Ideally used in high temperature working conditions with high loads, during pre-firing and firing.
Hyper-technical roller, it guarantees excellent material support for the production of all types of tile, 3 to 20 mm thick. Excellent thermal shock strength facilitating maintenance operations. Read more
Hyper-technical roller. The innovative production technique based on raw materials spraying and extremely high firing temperatures makes it suitable for use in maximum stress conditions. Read more
Special carbide compound roller for the quick cooling area. It is characterised by high thermal conductivity, low expansion coefficient and a high elastic modulus.
Special, patented roller. Through the use of different peripheral speeds, it is able to realign tile feeding before the material reaches the firing area.